Dual Fuel Range Cooker With 13amp Plug
Are you a home cook who loves the responsiveness of gas cooktops, but needs an oven for baking? Discover a dual-fuel range cooktop that gives you the best of both worlds.
Gas cooktops are preferred by many home chefs with experience in the kitchen due to their superior temperature control. They also permit them to use advanced cooking techniques such as charcoaling. These powerful stoves are expensive, especially if they require an additional gas connection and an electrician for installation.
What is a 13amp outlet?
If you own a dual fuel range cooker (also called a gas and electric oven) is required, you'll need an appropriate 13 amp plug. The plug also needs to be hard-wired into the cooker ring circuit by a fully qualified electrician.
This ensures that the current passing through the plug is safe and not excessive, which could cause an electrical fire danger. The plug has an electric fuse that regulates the current. The fuse will blow when it is overloaded. This protects the appliance from overloads of electricity.
The fuse is rated at 13 amps, as indicated on the top of the plug. This indicates the maximum amount of current the plug could pass without damaging the appliance or causing heat to the socket. It is important that when replacing fuses, you always use the same rated amps as the original. If you replace the fuse using one with an alternative rating, you run the risk of overheating the socket and possibly placing yourself and others at high risk.
A 13 amp fuse will be a ceramic type that is extremely robust and able to withstand the high temperatures produced by a range cooker. Ceramic is also fire-proof, which makes it a more suitable option than other types of fuse.
There are a variety of ways to install an 13 amp plug. The plug can be connected to a live socket by using a screw or plastic jaw cord clamp. The cord clamp should be tightened after the plug has been firmly pushed into place.
Before connecting the wires, you may have to remove the wiring diagram on cardboard that is placed on top of the pins on some plugs. The wires should be cut to the correct length, as if they are too long they can get crushed when plug covers are changed. The earth wire must be the longest in order to connect it before the neutral and line pins.
How do I connect an outlet with 13amps?
The majority of dual fuel range cookers in the UK are connected to 13 amp plug sockets and this is very important as ovens can draw a significant amount of power and the standard plug sockets are capable of 10 amps.
Generally speaking new appliances should be equipped with plugs at the time of purchase and it is all in keeping with the Plugs and Sockets etc (Safety) Regulations 1994. Older appliances might not have a plug installed and this is the problem.
The first thing to consider when connecting a cooker to an existing plug socket is to make sure that the fuse rating of the fuse box is similar to that of the plug. This is important because a faulty fuse could be dangerous.
It is also recommended that the fuse has been completely seated into the cartridge, and there isn't any excessive movement. The next step is to prepare the flex that will be used. Remove the sheathing from the flex to expose the three conductors that are insulated within. Use a utility blade to cut the sheathing just beyond the cord grip at the entry point of the plug. The blade will not penetrate the insulated conductors. The nick should be wide enough to allow the sheathing to split and then expand as it is pulled back, revealing the cable underneath. Cut off the excess sheathing leaving a little more than 40mm over the flex.
The flex is placed over the plug, with the earth terminal on top and the neutral and live terminals on the bottom. Using the conductors with the colors to guide you to the right direction, the sheathing should be removed from each pin and the internal cable is fixed to the correct terminal using the cord grip. If the plug has an attached cord clamp that is screw-type, loosen it and then pull the insulation back to expose the copper wires. Connect each insulated wire to the correct terminal by using the channel in the plug. Start with the earth conductor first, then the neutral and then the live.
What is the maximum draw of a 13 amp plug?
The maximum power draw of a 13amp plug is 3kw at 230volts. This is a lot of power but the standard fuse on the UK plug will not fail until the cable reaches a hazardous temperature. It is essential to be aware of the amount of power you're using in your kitchen as a defective plug or socket can lead to an accident.
The fuses in plugtops are ceramic, approximately 25mm long and 240V mains rated. The fuses will have an BS Kitemark or a similar mark on the side, and they will contain sand. There are also cheaper glass or plastic alternatives, but they shouldn't be used with a live plug, except if you don't want to blow up the fuse and possibly get electrocuted!
Most dual fuel range cookers sold in the UK require a hard-wired connection and will not plug directly into the wall socket. They are usually connected to a separate cooker ring circuit, which is only suitable for appliances that consume up to 20 amps.
Check the ring circuit of your home by using the fuse box, or contact an electrician nearby. You can ask whether the sockets are connected to the same ring or if they are distinct. They will also be able to tell you if there's a separate circuit to power your oven.
When you're looking to buy a brand new dual fuel range cooker the size of your kitchen is a vital factor to consider. We offer a broad selection of cookers that can be adapted to any space. Pick from compact 50-60cm dual-fuel models or huge 90cm+ double ovens from top brands like Rangemaster and StovesAreUs.
We also have a wide variety of multifunction electric and gas cookers. These versatile machines let you cook a variety of meals such as curries, pasta, and casseroles!
Explore our full range of Cookers in Currys online or head in-store to browse. We offer free installation at home and delivery on selected range cookers, as well as flexible payment options. Our staff is ready to answer any questions you may have. You can contact us by email or telephone. Credit is subject to status and terms & conditions apply.
What is the maximum current draw of a cooker switch?
There is a lot of confusion about the maximum current draw of the cooker switch. Most cookers are hard-wired and connected to a dedicated oven-ring circuit not a standard socket. This is due to the fact that they often consume far more than 20 amps of power when the electric oven and gas hob are used.
Therefore, you will not find a dual fuel range cooker that could be connected to a standard socket because it could pose a significant fire risk and be against electrical safety regulations. A licensed electrician should install new electrics in the kitchen, connecting them to an oven. They will also ensure that the total load of the oven and the hob does not exceed the circuit's supply capacity.
The benefits of a dual fuel range cooker are the receptive cooking power of a gas stove along with the precision of an electric oven. They are therefore a favorite among chefs as well as home cooks. Dual fuel range cookers are perfect for trying out different cooking techniques, such as searing or charring.
When buying a new range cooker you'll have to consider a number of factors like size, function and price. Additionally, you'll also need to make sure that your home has the right gas hook-up for the appliance. If you aren't sure, it is best to make an appointment with a Gas Safe engineer to inspect your property before installation.
The Currys range of dual fuel range cookers offers options to fit a variety of budgets, from affordable models from Indesit and Zanussi to our own exclusive Essentials collection. If you are looking for something more advanced we have a selection of premium JennAir models, that come with several innovative features.
dual-fuel range style cookers is crucial to read the user's manual before purchasing a dual-fuel range cooker. This will give you specific information about the electrical and gas requirements. try these guys out will require gas connections in your home. A plumber may be required to install it for you. It is also possible to require a dedicated cooker-ring circuit, installed by an experienced electrical engineer.